MK3s+ filament cover with PTFE fitting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a modified filament cover for the MK3s+ that allows a "reverse bowden" / filament guide setup by installing a…
- Rating
- 4.9 / 5
- Likes
- 114
- Downloads
- 723
- Makes
- 21
- Views
- 2,747
- Reviews
- 20
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a modified filament cover for the MK3s+ that allows a "reverse bowden" / filament guide setup by installing a PTFE fitting measuring M6x4.
Please check that the threaded fitting does not protrude on the other side. That is why I mentioned a 4mm length thread.
PS: It works for MK3s also LE: You need a shorter bolt for MK3s otherwise, while tightening, you will thread into the extruder body. Not a big deal as it doesn't affect functionality, but you should be aware.
17.01.21 Added an M10 type FS Cover with 7mm depth. I had to thicken the cover so that it ca still be printed as Prusa intended.