FT-6 Dual Z MOD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My FT-6 was having a Z axis skipping issue when Zhop was on so I switched to dual Z axis motors, updated the firmware…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My FT-6 was having a Z axis skipping issue when Zhop was on so I switched to dual Z axis motors, updated the firmware to use E1 driver for the second Z motor. All is well now. Here are the tools I used. The clamp is for the bed so you don't have to worry about it falling. The ones I used has threaded inserts. I did design one without inserts (
Clamp-B-Z1-NI.stl). Let me know if it works for you.
Note: Don't forget to edit Marlin to use Z2 and use G34 at the start of your prints!
Print Settings
Printer Brand:
Folger Tech
Printer:
Folger Tech FT-5
Rafts:
No
Supports:
Yes
Resolution:
.26
Infill:
15
Filament: Xyltech PETG Grey
Category: 3D Printer Parts