P1P Fan Duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Fan Duct for the P1P with 38x20mm Heatsink
- Ocena
- 5 / 5
- Polubienia
- 76
- Pobrania
- 386
- Wydruki
- 4
- Wyświetlenia
- 3085
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I drew inspiration from this model, but I decided to redesign it completely from the ground up as it didn't fit properly on my heatsink.
Bambu Lab P1P Fan Duct for 40x10 or 40x20 mm Fan by suit | Download free STL model | Printables.com
The model is designed for a 40x40x20 fan (40x40x10 should be fine too) and cools the drivers and capacitors. I would recommend the 3 or 4-pin 5V model from Noctua.
I think my heatsink was 38x20. It fits perfectly for me.
In my case, I used PETG and printed it with support.
Here is a good explanation of how to connect everything to the P1P motherboard.
(1) Guide for P1P & X1(C): How to replace stock fan with noctua fan : BambuLab (reddit.com)
Like this model? Want to support me?
Buy me a coffee <3
buymeacoffee.com/pyz3d
https://buymeacoffee.com/pyz3d