T-rex 4 hip connectors fixed, with X1C 3mf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Better fitting hip connectors. 3mf can be used for X1C or models by themselves.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For Makerbot's T-rex fossil.
The 3mf file is for Bambu X1C. I used Inland bone white, 0.4mm nozzle, 205*, 60* bed, 0.16mm layer height, and is for a 200% scale t-rex so adjust scale proportionally if you need to.
The models can be saved if you don't have a Bambu X1C.
The 4 hip connectors between upper and lower hips have X, Y and Z scale adjusted independently for tighter fit and the prongs have been made skinnier in order to compensate for the tighter fit so they bend rather than break. The rectangles you see in the 3D file are negative parts, not something that actually prints.
They may fit slightly differently based on your printer and filament, slicer settings etc but this should get you further than the original files did.
I will upload sperate files for each type of clip that I have modified for better fitment.