3d Drums: 14" Snaredrum in Segments with Snarebed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
14" Snaredrum in Segments with Snarebed and as-good-as-possible hidden segment-borders...
- Ocena
- 0 / 5
- Polubienia
- 85
- Pobrania
- 296
- Wydruki
- 0
- Wyświetlenia
- 2343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
14" Snaredrum in Segments with Snarebed and as-good-as-possible hidden segment-borders...
Print with support and as much infill as you can! A more solid snare shell makes a more solid sound… (my opinion). BUT: a infill-pattern can create a cool looking pattern with a good lighting condition, when you use a transparent filament… go for it! I would love to see this… I cannot print all my ideas… that is YOUR part, drummers out there!
The bearing edges will need some rework with sandpaper… to make a smooth even surface for the snare-heads… especially where the segments fit together…!!
The snare-bed also needs some sanding to become as "slippery" as possible…
Segment A and B need to be on the opposite side - with it's Snare-bed and 3 drill holes.
The other segments C and D fill in the space to make it a round snare. (Easy, you can do this…)
Experiment with some filament-changes, so you will get some cool-looking-snares…
Contact me about the metal-parts… it is a rip-off of a SONOR-Snaredrum with a TAMA-throwoff-system. I really like it…
Sounds great and I was able to print all parts in one on my Bambulab…
Needs some more prints on a smaller printer…
Go and print it! Let me know your learnings… and hit it! :)