T-rex 7 leg/foot/head connectors fixed, 200% scale
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified the 7 connectors to fit much more tightly to hip/femur/tibia/foot and head/neck.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 300
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This file is for a 200% scale Makerbot t-rex fossil.
I modified the geometry of the 7 connectors to fit much more tightly to hip/femur/tibia/foot and head/neck.
You will probably need to use some pliers to slightly squeeze the connectors to get them into their sockets, but they will fit much more rigidly than the stock ones which just wobble and shake all over the place.
The brim in the 3mf is acting a little weird on this file but I was able to peel it off by hand pretty easily.
The 3mf file is for Bambu X1, 0.4mm nozzle, 0.16mm layer height. I personally used Inland bone white, and that's what all my fitment testing was based on.
I have uploaded my modified versions of all the other connectors as well, just check out my profile for my other models. Also have other fixed t-rex parts.