MEGA 60% GH60 MODERNIZED CASE (SOFT MOUNTED PCB, BOUNCY!) FOR CUSTOM MECHANICAL KEYBOARD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modernized case for GH60 or 60% formfactor keyboard designed to be a bit bouncy when you type.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 2205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a modernized case for GH60 or 60% formfactor keyboard designed to be a bit bouncy when you type. The case is designed to mount the GH60 PCB via Soft TPU jackets instead of screws.
Your 3D Printer needs to be able to handle minimum of 300mm print axis in either X, Y, or Z (or XY diagonally) axes in order to print the case without splitting it up. the case is about 300x105x25.5mm.
BOM:
M3 bolt 16mm x4 (taper head preferred)
M3 Brass Heat Insert 8mm x4 (slightly shorter is acceptable too)
A few gram of TPU for printing the jackets.
300-350 gram of PLA/PETG/ABS/PETG depending on your print settings.