1 / 4
The Nonmagnetic Animal - notebook stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Animal notebook stand carefully designed by "Just Why Design" ... yes, The Nonmagnetic Animal notebook stand.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 320
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print this beauty with 3 perimeters and 40% infill from your favourite filament.
No magnets are to be used, the locking mechanism is purely mechanical.
Assembly with:
self locking nut M4 … 1pc
worm screw M4x20 … 1pc
screw M4x8 with cylindrical head (DIN 912) … 1pc
spring 7mm diameter, 15mm lenght (or a spring from a pen) … 1pc
Assembly steps:
- after printing, insert the spring in the cavice in the foot part
- insert the M4x8 screw in the cavice, so it will work as a piston
- insert the self locking nut unto the support. Make sure the nut is in correct direction (when assembled, the nylon ring must be facing the dead end hole)
- push and hold the piston inside the cavice and insert the support in the foot part
- insert and fasten the worm screw lightly