1 / 4
The Nonmagnetic Animal - notebook stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Animal notebook stand carefully designed by "Just Why Design" ... yes, The Nonmagnetic Animal notebook stand.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 28
- Makes
- 1
- Views
- 322
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print this beauty with 3 perimeters and 40% infill from your favourite filament.
No magnets are to be used, the locking mechanism is purely mechanical.
Assembly with:
self locking nut M4 … 1pc
worm screw M4x20 … 1pc
screw M4x8 with cylindrical head (DIN 912) … 1pc
spring 7mm diameter, 15mm lenght (or a spring from a pen) … 1pc
Assembly steps:
- after printing, insert the spring in the cavice in the foot part
- insert the M4x8 screw in the cavice, so it will work as a piston
- insert the self locking nut unto the support. Make sure the nut is in correct direction (when assembled, the nylon ring must be facing the dead end hole)
- push and hold the piston inside the cavice and insert the support in the foot part
- insert and fasten the worm screw lightly