Snap Walls- Building upwards and onwards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Seeing the Snaps walls that were in the winners pool for a contest i noted the creator listed some possible improvements
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 587
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
Seeing the Snaps walls that were in the winners pool for a contest i noted the creator listed some possible improvements, Mainly vertical stacking and floors.
While i've modified (In tinkercad, accuracy is ,,, suspect) the walls i've yet to get a good floor design however i hope that the original creator can incorporate these into the final design.
Rail attachments - A top rail and subsequent slot have been added to the upper and lower surface, when stacking walls with more than one orientation these will provide a substantial purchase for light work and game play.
Flooring - I've added a 0.35 slot hidden within the lower portion of the walls, this allows for a approx 0.3 thickness floor to be slide into the recess, in the case of laying out floors i suggest s similar connector to the walls, within the confines of 0.35mm to allow slot insertion and floor to floor connectivity.
I would suggest printing in Resin, benefits to accuracy and rigidity would help a small item like this no end.
This is by no means a finished project for myself and mainly upload this to help the original creator with some ideas.