Snap Walls- Building upwards and onwards
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Seeing the Snaps walls that were in the winners pool for a contest i noted the creator listed some possible improvements
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 102
- Makes
- 0
- Views
- 591
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
Seeing the Snaps walls that were in the winners pool for a contest i noted the creator listed some possible improvements, Mainly vertical stacking and floors.
While i've modified (In tinkercad, accuracy is ,,, suspect) the walls i've yet to get a good floor design however i hope that the original creator can incorporate these into the final design.
Rail attachments - A top rail and subsequent slot have been added to the upper and lower surface, when stacking walls with more than one orientation these will provide a substantial purchase for light work and game play.
Flooring - I've added a 0.35 slot hidden within the lower portion of the walls, this allows for a approx 0.3 thickness floor to be slide into the recess, in the case of laying out floors i suggest s similar connector to the walls, within the confines of 0.35mm to allow slot insertion and floor to floor connectivity.
I would suggest printing in Resin, benefits to accuracy and rigidity would help a small item like this no end.
This is by no means a finished project for myself and mainly upload this to help the original creator with some ideas.