BIQU CB1 Heatsink 4010 Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fan Mount for BIQU CB1 Heatsink. I have included 2 files. One for mounting from bottom (Threaded) and one from top mount
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 211
- Wydruki
- 3
- Wyświetlenia
- 806
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Fan Mount for BIQU CB1 Heatsink.
I have included 2 files. One for mounting screws from bottom (Threaded) and one to screw down from above (this was made specifically for the Manta m5p board, as the screws are placed from the top down, but should work on others). I included the bottom screw mount as it appears there are some mounting options that let you mount that way.
I printed this in Polymaker ABS Polylite. Be sure to have your flow well tuned for tolerances. I followed this example
https://3dprintbeginner.com/flow-rate-calibration/
I have also included the original SketchUp web files. Please feel free to modify and repost as you wish. Please respect license (General Public License v3.0)
You will need the following hardware to install
- x1 4010 cooling fan with compatible voltage for your setup
- x3 M3x12mm screws
- x2 M2.5x18mm screws
- x2 M2.5x20mm screws