Gloria the Unicorn
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Someone asked me for a unicorn with a hat and a cape, so I printed one.
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 147
- Wydruki
- 1
- Wyświetlenia
- 1384
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Someone asked me for a unicorn with a hat and a cape, so I printed one. We decided to share the design with the maker community.
Remixed from: https://www.thingiverse.com/thing:3746639 (unicorn), https://www.thingiverse.com/thing:2595644 (hat), and https://www.thingiverse.com/thing:1167988 (cape).
I used Blender's sculpt mode and bool tool -> subtract to get the mane to fit under the hat and cape.
It's a little tricky to assemble the cape; the front part attaches to the main part via two rather thin lines. See the two purple/blue closeups for how the pieces fit together. If printed in PLA then super glue is enough to hold it on. I also used a soldering iron to melt the parts of the cape together (note this should not be attempted unless you have a worn out soldering tip that's okay if it gets ruined).