Flashlight nightstand - wall screw mount (parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Always have a flashlight near at night in case of emergency! To prevent it keeps falling, create it's own "fixed" place.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
I always have a flashlight at hand in case of an emergency at night. It kept “falling” around at my nightstand, making it hard to find if you ever really need it.
Then I came across this flashlight wall mount (if you like/download/make this one, also give the original creator a like!) and this was the solution to have a “fixed” place to find my torch when needed.
I was so happy with it I immediately created another one for a different flashlight.
I changed the original OpenSCAD file from @Low-Z to work with variables and add some comments in the code to make it more explained / readable.
The design is really working well, for example the opening on the front can be used to have a small rope or clip on the flashlight like the Anker Bolder LC40 I got.
Print settings:
I printed mine with a 0.6 needle, which came out perfectly without supports.
Settings I used:
Fillament type: PETG (But PLA will do as well)
Support: no (might be needed, depending on the diameter of the flashlight.)
Infill: 40%
Infill type: Gyroid
Layer height: 0.3
Nozzle: 0.6 (But can be printed on a 0.4n fine.)