HSW Tiny Bit Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basic small bit holder for electronic bit sets
- Ocena
- 4,889 / 5
- Polubienia
- 59
- Pobrania
- 405
- Wydruki
- 10
- Wyświetlenia
- 1280
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Couldn't find a small bit holder, only the standard sized ones, so I made one myself. It's nothing fancy, but sufficient for my needs! Hope someone else will be able to use this too
The wide model is for the rubber black piece to be inserted in the event you don't want to use the one with just holes. It's a very snug fit, it will not fall out.
The holes model has some issues on the back with too thin of walls, wasn't a issue for me since it doesn't interfere with holding the bits, and you won't see it anyways..
Printed on:
Ender 3
0.2 quality
20% infil
No supports required