Bambu Lab Easy Side Spool Holder for P1P, X1C, ARC enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple side spool holder for Bambu Lab printers and ARC enclosure. One printed part and ptfe tube combo.
- Ocena
- 4,6 / 5
- Polubienia
- 47
- Pobrania
- 303
- Wydruki
- 5
- Wyświetlenia
- 2320
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
An easy-to-print side spool holder for Bambu Lab P1P and X1C. Initially designed for the ARC enclosure, it will also work on X1C and barebone P1P.
BOM:
- M3x8mm - 1pc
- M3x10mm - 1pc
- ptfe tube OD4mm - 87mm
Instructions:
- This part is designed to be rigid and would do well with rigid filament ie PLA, PLA+, ABS and ASA
- I would not recommend PETG or Nylon.
- You may need to add X&Y compensation if you are printing with ABS to counter shrinkage
- Print with no support needed. (see image). I have included a 3mf file with print orientation.
- Print → Insert ptfe tube → Mount to frame → Mount the spool. Easy
There is no Patreon or OnlyFans (hahaha). However, if you like my designs and want to contribute to my coffee addiction & help fund the filaments I need for prototyping, a contribution to my Ko-fi or paypal.me will be greatly appreciated.
Caveat
As with all my designs, it may and may not work for you. So print and install at your own discretion.