Bearing Ring for 6mm Airsoft BBs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bearing Ring for 6mm Airsoft BBs The two parts can be snapped together after filling up one side with Airsoft BBs.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 490
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- GNU General Public License v2.0
Bearing Ring for 6mm Airsoft BBs
The two parts can be snapped together after filling up one side with Airsoft BBs.
Depending on the accuracy of your printer you may need to deburr or file down some of the mating edges.
This is only usable as thrust bearing. Depending on the accuracy of the print and the wear state of the bearing, minimal friction may be dependent on the load on the bearing.
small: ID:47.846 mm OD: 74.50 mm
medium: ID: 111.50 mm OD: 137.00 mm
large: ID: 262.00 mm OD: 235.346 mm
Print instructions
Category: Household Supplies Summary
Bearing Ring for 6mm Airsoft BBs
The two parts can be snapped together after filling up one side with Airsoft BBs.
Depending on the accuracy of your printer you may need to deburr or file down some of the mating edges.
This is only usable as thrust bearing. Depending on the accuracy of the print and the wear state of the bearing, minimal friction may be dependent on the load on the bearing.
small: ID:47.846 mm OD: 74.50 mm
medium: ID: 111.50 mm OD: 137.00 mm
large: ID: 262.00 mm OD: 235.346 mm