Junkers Celsius (etc) side covers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Covers for the holes on the sides of the Junkers Celsius boiler casing (and similar)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 497
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
Covers closing the side openings in the Junkers boiler casing.
Mounted with magnets (easy to remove) 6x2.5mm (or 6x3 too)
There are many places for magnets, 3 were enough for me to stick to the housing very well. At the back of the holes for the magnets there are small holes - to be filled with some glue - but (for me) it was enough to push the magnet into the hole with pliers, it holds itself without the help of glue
I attach two versions - one "normal" with the same size as the metal casing of the boiler (i.e. - the insert is up to the wall), and a slightly shorter version which you can see in the pictures - I have tiles on the wall, so the insert is 6mm shorter
Printed on BambuLab from PETg white, with PLA as support interface - everything is setup in .3mf files.