Thing Holding Lithophane Moon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use an LED tea light for illumination
- Ocena
- 0 / 5
- Polubienia
- 55
- Pobrania
- 322
- Wydruki
- 0
- Wyświetlenia
- 1495
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
Great Thing model by JS-Studio. Thing is holding a 100mm moon generated from Lithophanemakers.com and printed on a Bambu Labs X1C. The hole for the tea light is a negative volume object placed towards the rear. I sized mine for 35.6mm, but you can make it any size. I supplied an stl that includes the base and the moon. You'll need to add the negative volume for the hole. These stls are fairly large and it took about 5 minutes to slice it using 100% of my CPU. It's not locked up, just give it a few minutes to slice. Supports were a little difficult to remove, but made much easier by the support W.
I also supplied just the moon in case you want to add your own base and modify the moon placement on the hand. The Thing model can be downloaded from the original poster.
Settings for Bambu Lab X1C:
.2mm Layer, .4mm Nozzle,4 Walls
15% Rectlinear Infill
Painted supports, manual, snug. Bambu Support W interface w/ 2 interface layers
Included .3mf is for Bambu Studio and has all my print settings.