CFD-optimized Fan + Sherpa mini for Prusa Mini+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified version of improved cooling for the possibility of installing Direct drive (Sherpa mini)
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 590
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
WARNING! Installing direct drive in such way reduce your maximum Z height to 140mm
I decided to improve the cooling of my Mini+ with a direct drive. But in order not to install additional printed parts, I decided to rework the model with seats for Sherpa Mini.
As users note in the comments, you need to install a different table mount so that the cooling does not touch the signet. the part that covers the contacts. Low Profile Heatbed Cover
I faced such a problem, because I installed a copper heartbreak from Mellow, and it is 1-2mm higher than the original