CFD-optimized Fan + Sherpa mini for Prusa Mini+
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified version of improved cooling for the possibility of installing Direct drive (Sherpa mini)
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 30
- Makes
- 0
- Views
- 590
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
WARNING! Installing direct drive in such way reduce your maximum Z height to 140mm
I decided to improve the cooling of my Mini+ with a direct drive. But in order not to install additional printed parts, I decided to rework the model with seats for Sherpa Mini.
As users note in the comments, you need to install a different table mount so that the cooling does not touch the signet. the part that covers the contacts. Low Profile Heatbed Cover
I faced such a problem, because I installed a copper heartbreak from Mellow, and it is 1-2mm higher than the original