RasPi 4010 Cooling Fan mount - LDO Input shaper board compatible!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modification to my previous fan mount that allows the use of the LDO input shaper board.
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 157
- Wydruki
- 3
- Wyświetlenia
- 846
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Slight change to the layout of the fan mount, to allow the use of the LDO Input shaper board.
There are 2 versions:
Display Port
This version has access to the display port and the camera port, whilst still allowing the use of the LDO input shaper board.
Due to the size of the fan, and the lack of space. A small spacer is required to allow the fan to clear the mounting screw for the Pi.
For this one, attach the frame to the Pi, then install the spacer and fan.
No Display
This version doesn't have access to the display port, and requires no spacer. Utilises the mounting hole for the Pi. Only 3x heatset inserts required for this version.
I have used a 3mm drill bit to increase the size of the mounting holes on the Pi by hand so I can use an M3 screw. You can also use an M2 with a washer if you prefer to.
I've included a modified version of the Voron Pi mount that allows you to self tap an M3 screw into it.
Massive thanks to @Hr_Ravn for the initial measurments, for testing this, and for the use of their pictures.
(I didn't have the input shaper board to test it)