HSW Angled Drill Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A drill holder for the honeycomb storage wall, the ends slightly angled up to prevent devices sliding off.
- Ocena
- 4,889 / 5
- Polubienia
- 131
- Pobrania
- 659
- Wydruki
- 10
- Wyświetlenia
- 2725
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I was using the drill holder by Shoe, and it fits most of my drills, glue gun, etc. That one has straight ends, however, and made me concerned about devices sliding off. In particular, I have one HSW attached to the shelf on which my printer sits, and although the vibrations are not huge, it made two of my devices slide off.
For that reason I decided to modify the holder so its ends are angled up, preventing the drill to slide off.
There is two versions:
- the standard version, 70mm wide inside, which fits most devices
- a narrow version, 48mm wide inside, which I needed for a very narrow dust blower
To attach to HSW you will still need:
- two “insert-with-M3” pegs from the original HSW,
- two M3 screws (8-12mm)
- two M3 nuts