Mountable Ryobi ONE+ Battery Socket with Exposed Terminals
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Locking battery mount for Ryobi ONE+ 18v battery with mounting holes and exposed terminals.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 291
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This locking battery mount for the Ryobi ONE+ 18v battery allows you to add easily swappable power to all your projects. The model has two holes (center distance = 1.25") for mounting, and a 0.125" chamfer at the base of a 1.209" wide, 1.433" long, 1.420" deep socket to align with your designs. This means you can securely fasten this socket and have confidence your battery will stay attached.
Instructions for mounting: 2x M4 SHCS can be used in the mounting holes from inside the mount. 12mm minimum length recommended. M4x8.1mm threaded inserts work great for the part receiving this mount.
Material: PLA
Supports: Yes
Brim: Recommended but not required, use at your discretion.
Be sure to upload a picture of your make!