Mountable Ryobi ONE+ Battery Socket with Exposed Terminals
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Locking battery mount for Ryobi ONE+ 18v battery with mounting holes and exposed terminals.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 37
- Makes
- 0
- Views
- 291
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This locking battery mount for the Ryobi ONE+ 18v battery allows you to add easily swappable power to all your projects. The model has two holes (center distance = 1.25") for mounting, and a 0.125" chamfer at the base of a 1.209" wide, 1.433" long, 1.420" deep socket to align with your designs. This means you can securely fasten this socket and have confidence your battery will stay attached.
Instructions for mounting: 2x M4 SHCS can be used in the mounting holes from inside the mount. 12mm minimum length recommended. M4x8.1mm threaded inserts work great for the part receiving this mount.
Material: PLA
Supports: Yes
Brim: Recommended but not required, use at your discretion.
Be sure to upload a picture of your make!