1 / 14
100W PD Power Bank USB-C (IP2368, 4S1P) — zdjęcie 1
1 / 14

100W PD Power Bank USB-C (IP2368, 4S1P)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Compact PD power Bank with USB-C

Ocena
0 / 5
Polubienia
17
Pobrania
68
Wydruki
0
Wyświetlenia
1536
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I decided to make my portable power bank with PD using IP2368. I used 4 batteries 18650 connected in series. The battery balancing board must be attached to the battery holders. 

No bushings are required! You will need a few screws:

  • 4 x M2.2x5mm - for battery balance board
  • 2 x M2.2x5-10mm - for IP2368 board
  • 4 x M2.2x5-10mm - for back cover
  • 4 x M2.2x5-10mm - for front cover

It is preferable to print it with PETG or another material with a higher melting temperature because the IP2368 board heats up at high power.

I have uploaded GCODE files for PLA and PETG.

IP2368 and Battery Balance Board: https://www.aliexpress.com/item/1005003954338954.html

 

If you like the project, you can buy me a beer: 

ETH > 0x9B2A6E93323b7c23f338C3a2006920F5b69dEbA6

USDT (ETH network) > 0x9B2A6E93323b7c23f338C3a2006920F5b69dEbA6

Tagi