1 / 14
100W PD Power Bank USB-C (IP2368, 4S1P) — image 1
1 / 14

100W PD Power Bank USB-C (IP2368, 4S1P)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Compact PD power Bank with USB-C

Rating
0 / 5
Likes
17
Downloads
68
Makes
0
Views
1,536
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I decided to make my portable power bank with PD using IP2368. I used 4 batteries 18650 connected in series. The battery balancing board must be attached to the battery holders. 

No bushings are required! You will need a few screws:

  • 4 x M2.2x5mm - for battery balance board
  • 2 x M2.2x5-10mm - for IP2368 board
  • 4 x M2.2x5-10mm - for back cover
  • 4 x M2.2x5-10mm - for front cover

It is preferable to print it with PETG or another material with a higher melting temperature because the IP2368 board heats up at high power.

I have uploaded GCODE files for PLA and PETG.

IP2368 and Battery Balance Board: https://www.aliexpress.com/item/1005003954338954.html

 

If you like the project, you can buy me a beer: 

ETH > 0x9B2A6E93323b7c23f338C3a2006920F5b69dEbA6

USDT (ETH network) > 0x9B2A6E93323b7c23f338C3a2006920F5b69dEbA6

Tags