Arca Swiss Belt Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple but effective belt clip for you camera with an Arca Swiss Quick Release Plate.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 1090
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
This is a simple clip to allow you to mount your camera, or other Arca Swiss quick release enabled device to your belt. it's a dead simple print, but you will need some extra hardware:
4x M4x12 Countersunk Machine Screws
4x M4 Heat Set Insert
1x M5x12 Countersunk Machine Screws
1x M5 Nut
The other thing you will need is a CyTak 360 mount. They can be found here and have a wide range of options to choose from. I chose the Belt Clip variant, but any of these will work. You'll also notice that I included a nut adapter to go from M5 to M6. This is because the M6 nut that comes with the CyTak mount would require an M6 bolt, which is too large to fit into the design.
Instructions:
- Print 1x Top Plate (Flipped Over), 1x Base Plate (Flipped Over), and 1x M5-M6 Nut Adapter
- Add the Heat Set Inserts on the BACK of the Base Plate (the side with the grooved circle on it)
- Insert the 4 M4x12 screws into the top plate and screw them through the Heat Set Inserts in the Base Plate
- Insert your M5 Nut into the M5-M6 Nut Adapter
- Insert your Adapted Nut into the back of the CyTak 360 mount
- Screw the M5x12 screw through the countersunk center hole into the Adapted Nut on the Mount.
- Enjoy!
If you have any questions about this, or ideas on how to improve it please let me know I'm super interested in everyone's feedback!