1 / 4
Ryobi Track Saw shim for WEN clamp — zdjęcie 1
1 / 4

Ryobi Track Saw shim for WEN clamp

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

a WEN track saw clamp will not fit with a Ryobi track saw this shim will allow for the use of the WEN clamp.

Ocena
0 / 5
Polubienia
18
Pobrania
111
Wydruki
0
Wyświetlenia
874
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

I created this shim to be able to use WEN tracksaw clamps with a RYOBI track. 

I lost my other RYOBI track saw clamp and as of now RYOBI doesn't sell replacement clamps. So, I bought the cheap WEN clamps on amazon thinking they would be close enough to work but of course the WEN clamps are too skinny for the clamp channel. This shim should be strong enough to hold the track down (even using PLA) since you really aren't putting too much force on the clamp just enough to keep the track in place. I still printed the part with 100% infill to make sure.

I also included a test file (20cm long instead of the full size of 60cm) in case you want to do a quick test or just don't feel like you need the whole thing.

 

FITS: WEN CT992F 7.5-Inch Quick Release Track Saw Clamps

Tagi