AirTag holder for keyring (with or without Polestar logo)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created a heavy-duty AirTag key ring that screws tightly around the Air Tag. Polestar logo is optional!
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 174
- Wydruki
- 0
- Wyświetlenia
- 1148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted an Air Tag holder for my keyring with a Polestar logo.
After being dissatisfied with many clip-together models, I made one that is screw-on – Very secure! Strong, heavy duty, rugged.
The white part of the Tag protrudes slightly through the holder to minimise bulk. The battery cap is covered and protected.
The Polestar logo has been inlaid into the holder, but there is a cap version with no logo provided too.
Printed in PLA. I printed at 0.12mm layer height for smooth surfaces, but 0.16mm should work too. Much more than that will compromise the small threads.
UPDATE: I have added a new v2 base with a stronger loop.