Liczymy pasujące modele…
Inspired by the design on tinkercad by örjan https://www.tinkercad.com/things/ejnXN5An6ae And by the design by Polestar itself for a protective snow cover for the chargepoint I designed this. The portrusion is meant to keep snow mostly…
+ detect thin walls + 2/3 perimeters + 10% infill Double cupholdeer and arm rest support for the Polestar 2. Cupholders fits 330ml cans and macdonalds cups. At least here in europe :) Built so the armrest can extend over the cupholder.…
The Polestar 2 Activity Key is designed to be disposable. However, if you do not want to throw it away and buy a replacement when the sealed battery runs out (~2 years), it is possible to extract the key electronics, replace the battery…
My custom version of the Polestar 2 charge cover, optimised to fit smaller 22x22 cm print beds like the Elegoo Neptune 4. The supplied .stl file does not contain the Polestar logo due to copyright reasons.
NFS Heat Polestar, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
A trash can modeled to fit in the center console of the Polestar 4. It has four 9mm diameter holes in the back to press fit / glue in magnets. It prints in 3 parts: Main trash can Lid bottom Lid top You can also only print the main trash…
The Polestar 2 parcel shelf has, in my humble opinion, two design flaws. When you remove the shelf, a string can fall through its hole easily and you can lose it on the ground without realizing it. The string is strongly tied with no…
The 10th addition to my logo lineup, the Polestar Logo.
I remixed this from: https://www.printables.com/model/90514-polestar-2-charger-snow-cover so like that it fits north american models.
This is a bin for the front part of the central console in the Polestar 2. Handy to keep your loose change, for example.
Very simple central console horizontal divider Printed in PETG
Polestar 4 Charging Cradle Retaining Lip – Keep Your Phone Secure! 📱🚗 Does your mobile phone slide out of the charging cradle in your Polestar 4 whenever you accelerate a bit too enthusiastically? You’re not alone! This retaining lip…
The battery in my key was dying, so rather than buying a new key, I cut open the shell and replaced the battery. I didn't really want to glue back together the original mangle shell, so I modeled a version that snaps closed. It's no…
This reduce the chance of snow building up around the charging plug. Printed mine in PETG-CF.
The 4 parts consist of the basic shape and the 3 shapes that can be integrated into it. Supports must be printed for the radius files I used PLA This model fits into the Polestar 4 middle console The photos are the individual parts and…
A basic organizer for the top of the Polestar 3 armrest compartment. The armrest compartment of the Polestar 3 is quite large but that is due to its depth. This means that it can easily hold longer items, but who does that in the armrest…
I have designed a holder for the Polestar 4 where a tablet can be attached to the rear seat. Unfortunately, it's a bit tricky to print because of the ball. Any holder from the trade for a ball size of 16.8 cm (is almost standard) can be…
I wanted an Air Tag holder for my keyring with a Polestar logo. After being dissatisfied with many clip-together models, I made one that is screw-on – Very secure! Strong, heavy duty, rugged. The white part of the Tag protrudes slightly…
Retention cradle to keep a phone in the centre of the charging pad and to prevent unwanted rear ejection under acceleration. Should fit any current 'non-Max' iPhone and any 'normal' Android handset. Max dimensions 79mm x 160mm
Polestar 4 Charging Cradle Retaining Lip – Large Version for Big Phones! 📱🚗 Does your mobile phone slide out of the charging cradle in your Polestar 4 whenever you accelerate a bit too enthusiastically? You’re not alone! This…
Never saw much use for the cup holder in the middle console of my Polestar2. So I decided to design a piece to organize stuff I use and need more frequently. There's room for: 4 charge cards A coin for shopping cards. (modelled after a 2…
Download the required hook from here: https://cults3d.com/en/3d-model/various/polestar-2-cup-holder-mroek
A few minor changes was made to the original model. When i first made the cupholder, I had very thin walls in some areas. One guy had put up some pictures of the location. I made the walls a bit thicker which fixed this issue. Made the…
Update: 12/21/2024 Added a little extra room to the latching part of the case. Previously it was difficult to get the key tag in and out. You may need to still file down the bump if it is still too difficult to remove. The key tag that…
This is a 17mm ball head mount for the Polestar 2 car's central control. It can be easily inserted into the ball head base without the need for adhesive, making it quite stable. The standard 17mm ball head allows for easy connection to…
I have designed a key and mobile phone holder as a cup holder for the Polestar 4. This has space in the smaller front holder, whereby the mobile phone is still clearly visible in this position ;-). Have fun
I replaced the soldered battery with a battery holder for CR2032
The little rubber bung thing on the end of the parcel shelf lace snapped when it got caught on something in the boot ( trunk ). I designed this little plug so that the lace can be threaded through it then shoved back in the rubber bung,…
Polestar Keychain w/ Logo, hollow design Bicolor revommended
Polestar 4 Dashboard Holder for Saphe Drive Mini 🚗✨ Keep your Saphe Drive Mini securely in place with this custom-designed dashboard holder made specifically for the Polestar 4 . It fits perfectly between the ambient lighting and the…
Polestar 4 Charging/Credit Card Holder – 5 Slots (Fits Driver's Door Side Storage) Looking for a neat and organized way to store your charging cards or credit cards in your Polestar 4? This custom-designed 5-slot card holder fits in the…
Polestar (Volvo) Waterproof Small Key Replaceable Shell, 3D Printed. When the battery of the small key fails, you can open the shell and replace the battery yourself. The original battery can be directly installed in the replacement…
Polestar Keychain. Made it for my dad cause he drives a Polestar 2 so why not upload it for other people to use.
Uploading this per request of some other Polestar 2 owners. I didn't want to have to carry along the fairly ugly standard key that came with the car, so I made this holder to store the board from the activity key in my Ridge wallet. This…
Custom inserts for the Polestar 4 door bins to keep your items organized and secure. Features: Cup Holder: Fits 2 x 33cl cans. Keeps them upright and rattle-free while driving. Divider: Organizes the large door pocket into smaller…
Easy dashboard attachement for a Polestar 4
The accessory adds elastic net hooks to the back of the Polestar 2 trunk privacy cover, allowing for the storage of lightweight and commonly used items such as folding umbrellas. Two hooks are designed to clip between the cover and the…
Took coltale's desk bin and scaled up the Z height to 220mm to account for our larger poop bags and to fit better in the 3's center console area. Use the top part of their model to hold the bags in place. We use earth rated refill bags ,…
Protective cover for the Polestar 2 charge port, designed to keep out snow and debris. Fits precisely over the charging area without modification. Includes embossed “P2” marking and optional initials. Optimized for 3D printing in PETG or…
This Polestar keychain was designed in two pieces, to be easy to print in different colours and precision (print settings see below). The backplate has indentations for the Polestar and the Polestar lettering is embedded. Dimensions:…
I've added some extrusions for better strenght. Needs more modification to fit easier onto the car.. the part that fits over the closing lid.
Replica of the Polestar golden valve stem model requires preparation of four magnets, each with a diameter of 10mm and a thickness of 5mm, to be embedded at the base. It is recommended to use silk gold PLA for printing.
Armrest console organizer with two quarter racks and two dividers
A universal remote control holder for your Polestar 4. It fits nicely into the gap between the dashboard thats used for the ambient light. I used tesa Nano Power Tape to stick the remote control in. Its a double sided tape thats reusable.…
Complete 4S battery module from Polestar 2, Volvo XC40 and C40
I do not use the cup holder and as there is not mush space to put my stuff, i created this “cup organiser”. everything is net, clean and organised. Remote, swiss knife, coin, pen, perfume, lipstick, etc. everything quickly accessible.…
Baseplate to mount a tablet holder to the rear of the front seats in a Polestar 4. Plate is designed for an M5 brass heat-set insert (7mm outer diameter, 6mm length) and an M5 threaded rod. I also used a counter nut and some Loctite to…
Update 25-09-2025: V2 version uploaded. This model provides a larger adhesive surface, allowing more double-sided tape to be used to prevent sagging under the weight of the phone. This mounting plate is made to fit on the back of the…
Just wanted a simple case that prevents buttons from being pressed. Seems to work? Version with and without Polestar-logo, and a Step-file if you'd like to modify it. (Printed on an ancient Prusa MK1, thereof the ghosting.) Category:…
The hook placed behind the driver seat is ok for a vest but unfortunately not for ⅔ shirts and pants is you go for a short trip. I created those models. Have fun and as usual feel free to ask and react. PS : as an additional comment pay…
Placeholder "cup" for the front cupholder in a Polestar 4, so small items like change, keys etc don't skid around, and also to keep the "arms" of the cupholder out of the way. Only fits the front cupholder - the rear one is wider. Printed…
[Original] Polestar (Volvo) Large Key Replaceable Logo Key Case. Featuring a newly designed barrel-shaped key case with curved contours, enhancing grip comfort. The logo is independently embedded, available in both Polestar and VOLVO…
This is a mount for the Comma 4 that is designed to clip on to the rear view mirror shroud of the Polestar 2. Ensures the unit is centered and at the perfect angle, while keeping it mostly out of view. There are 2 versions available: -…
This is a collection of adapters to install aftermarket speakers in 2021-2024 Polestar 2s. Also works for Volvo XC40 and other models using the same size speakers. Speakers: Front Tweeters - existing plates can be used Dash Speaker - 4" /…
use PETG or ASA Summary for the hook: 0.16–0.2 mm layers, 4 walls, 40% gyroid, 5 top/bottom layers, PETG or ASA. For the cup, 3 walls and 15% is fine
When Original Sports key run out of Juice, open and replace battery. This Body can be used to replace old body.
Towing eyes came loose in a recently purchased Polestar 2, with no obvious place to put them to stop them rolling around and making noise. I have made this simple holder so I can stash them under the floor or in the front without it…
Replica of the Polestar golden valve stem model requires preparation of four magnets, each with a diameter of 10mm and a thickness of 5mm, to be embedded at the base. It is recommended to use silk gold PLA for printing.
The accessory adds elastic net hooks to the back of the Polestar 2 trunk privacy cover, allowing for the storage of lightweight and commonly used items such as folding umbrellas. Two hooks are designed to clip between the cover and the…
Polestar (Volvo) Waterproof Small Key Replaceable Shell, 3D Printed. When the battery of the small key fails, you can open the shell and replace the battery yourself. The original battery can be directly installed in the replacement…
Very simple central console horizontal divider Printed in PETG
Custom inserts for the Polestar 4 door bins to keep your items organized and secure. Features: Cup Holder: Fits 2 x 33cl cans. Keeps them upright and rattle-free while driving. Divider: Organizes the large door pocket into smaller…
This model is a two part replacement shell for the Polestar 2 activity key. This shell does require 4x M3x8mm screws/bolts to secure the parts together and does not require nuts or washers. I would recommend printing this on a resin…
![[Original] Polestar (Volvo) Large Key Replaceable Logo Key Case.](https://media.printables.com/media/prints/d1dbfe0f-f720-4a3a-a12a-15dfd1f837de/images/10731670_33a320ea-ae2f-4f1e-b66d-b4fcca3a64cc_ad0bd2c4-55fe-43bc-a79a-c9045e994ee3/wei-xin-tu-pian-_20250922140157_432_32.jpg)
