Comma 4 mount for Polestar 2 and Volvo C40
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount for the Comma 4 that is designed to clip on to the rear view mirror shroud of the Polestar 2.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 1
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a mount for the Comma 4 that is designed to clip on to the rear view mirror shroud of the Polestar 2. Ensures the unit is centered and at the perfect angle, while keeping it mostly out of view.
There are 2 versions available:
- the 1-Piece mount which allows the Comma 4 to hot-swap
- the 3-Piece mount designed to look more OE, but it doesn't hot-swap and requires a right-angle cable
All models are oriented in the intended print direction. A brim is strongly recommended for the largest part of the 3-Piece mount. It will print without one, but you'll end up with some very noticeable layer lines.