1 / 3
Comma 4 mount for Polestar 2 and Volvo C40 — image 1
1 / 3

Comma 4 mount for Polestar 2 and Volvo C40

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a mount for the Comma 4 that is designed to clip on to the rear view mirror shroud of the Polestar 2.

Rating
0 / 5
Likes
1
Downloads
13
Makes
1
Views
281
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

This is a mount for the Comma 4 that is designed to clip on to the rear view mirror shroud of the Polestar 2. Ensures the unit is centered and at the perfect angle, while keeping it mostly out of view.

There are 2 versions available:
- the 1-Piece mount which allows the Comma 4 to hot-swap
- the 3-Piece mount designed to look more OE, but it doesn't hot-swap and requires a right-angle cable

All models are oriented in the intended print direction. A brim is strongly recommended for the largest part of the 3-Piece mount. It will print without one, but you'll end up with some very noticeable layer lines.

Tags