1 / 2
TAIR-3S Fotosnaiper front grip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A front grip for the TAIR-3S that makes it look less like an actual weapon and allows more comfortable focusing.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 365
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
No supports needed. Around 30% infill and 4 walls should be sufficient. I recommend using at least PETG though PLA-Plus may work too.
Should the focus ring be difficult to turn after assembly, screw in the Tairs focus limiter screw a bit more or move the grip back slightly.
You will need the following material for assembly:
- 2x bolts M5x20 or M5x25
- 2x bolts M4x10
- 2x nuts M5
- 2x heat inserts M4 (Model is scaled for Ruthex)
The bolts should be button, truss or pan head.