1 / 6
Smooth Bearing Spool Holder for Prusa Enclosures - Hotdogger REMIX — zdjęcie 1
1 / 6

Smooth Bearing Spool Holder for Prusa Enclosures - Hotdogger REMIX

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,61 € – 0,74 € netto (bez VAT)

Dla pliku: Knob_knurled_0.2mm_PLA_MK3S_48m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,67 € netto (środek widełek).

Masa podana przez autora
6 g
Czas druku podany przez autora
47,4 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

A REMIX bringing smooth dispensing action to Prusa enclosures!

Ocena
5 / 5
Polubienia
22
Pobrania
138
Wydruki
7
Wyświetlenia
1088
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I wanted to improve my spool holder for my enclosure. The stock one works, but seemed to have too much resistance especially for cardboard spools. So... off to Printables to find a better option… TLDR, nada.

Alright,  cracks knuckles…

Going out on a limb here, but smoothest enclosure situation is now… right here! With three stellar Printables combined into one! nxp200's roller (added a lip to stop jams in enclosures) + Brolin Workshop's bracket (love that honey comb beefyness) + SuperLeggera's end cap bolt (for normal hands) = this Hotdogger REMIX.

Thanks and enjoy! I have been ;)

\/(°ܫ°)\/

—   —   —   —   —  —  — 
 
Printing Tips/Settings:

  • Recommend using PETG
    • End Cap and Bolt can be printed in PLA
    • I elected to just do the bolt for a pop of color
  • Bracket - 20% infill - Print with supports (targeting the overhang at the end of arm)
  • Rod - 20% infill - Print with Brim to avoid the bottom from losing adhesion to the bed
  • Roller - 20% infill - Contains sacrificial layer
  • Cap & Bolt - 10-15% - easy printers

The included MF3 file and GCODEs have these settings per object
 

Required Hardware:

Putting it Together:

  • Remove the stock spool holder
    • Keep the two bolts
    • I left the two M3 nuts in the stock bracket
  • Remove the enclosure window push pin directly below the top most bracket bolt hole (the little black plastic push-pins)
  • Add the M3 nuts to your new bracket
  • Align the holes and bolt it down, stock bolts go back to the same spots
    • Use the M3x25 on the bottom most hole on the bracket
  • Assemble the roller with the bearings (press fit)
  • Slide the rod into the bearings and set the axel assembly onto the installed bracket arm
    • NOTE place the axel with the raised lip TOWARDS the bracket (this prevents a potential jam we saw in testing)
  • Add your spools, then the cap, and then the end cap bolt :)
     

Tagi