Smooth Bearing Spool Holder for Prusa Enclosures - Hotdogger REMIX
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A REMIX bringing smooth dispensing action to Prusa enclosures!
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 138
- Makes
- 7
- Views
- 1,088
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
I wanted to improve my spool holder for my enclosure. The stock one works, but seemed to have too much resistance especially for cardboard spools. So... off to Printables to find a better option… TLDR, nada.
Alright, cracks knuckles…
Going out on a limb here, but smoothest enclosure situation is now… right here! With three stellar Printables combined into one! nxp200's roller (added a lip to stop jams in enclosures) + Brolin Workshop's bracket (love that honey comb beefyness) + SuperLeggera's end cap bolt (for normal hands) = this Hotdogger REMIX.
Thanks and enjoy! I have been ;)
\/(°ܫ°)\/
— — — — — — —
Printing Tips/Settings:
- Recommend using PETG
- End Cap and Bolt can be printed in PLA
- I elected to just do the bolt for a pop of color
- Bracket - 20% infill - Print with supports (targeting the overhang at the end of arm)
- Rod - 20% infill - Print with Brim to avoid the bottom from losing adhesion to the bed
- Roller - 20% infill - Contains sacrificial layer
- Cap & Bolt - 10-15% - easy printers
The included MF3 file and GCODEs have these settings per object
Required Hardware:
- 2x Standard 608-2RS Bearings (OD: 22mm/ID: 8mm)
- 1x M3x25mm bolt
- 3x M3 nuts
Putting it Together:
- Remove the stock spool holder
- Keep the two bolts
- I left the two M3 nuts in the stock bracket
- Remove the enclosure window push pin directly below the top most bracket bolt hole (the little black plastic push-pins)
- Add the M3 nuts to your new bracket
- Align the holes and bolt it down, stock bolts go back to the same spots
- Use the M3x25 on the bottom most hole on the bracket
- Assemble the roller with the bearings (press fit)
- Slide the rod into the bearings and set the axel assembly onto the installed bracket arm
- NOTE place the axel with the raised lip TOWARDS the bracket (this prevents a potential jam we saw in testing)
- Add your spools, then the cap, and then the end cap bolt :)