Amcrest Wall Mount Bracket for Dome Cameras
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount bracket for Amcrest dome camera, similar to Amcrest AMCPFB203W. Tested with Amcrest IP5M-T1179EB-28MM.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 289
- Wydruki
- 1
- Wyświetlenia
- 1256
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The is a wall mount bracket designed to serve in place of the Amcrest AMCPFB203W, tested with Amcrest IP5M-T1179EB-28MM (the model of camera I have). The cavity inside is large enough to fit the ethernet connector and the camera's permanently attached cable.
This mounts directly to a wall or fence via four screw holes on the front. I would install it in this order:
- Attach camera mounting ring to bracket using two screws;
- Pull ethernet cable through the back of the mounting bracket;
- Connect the ethernet cable to the camera using the provided waterproofing hardware;
- Mount the bracket to a wall or fence using four screws - use caulk if needed on the screw holes to ensure your wall stays waterproof;
- Slide the camera onto the mounting ring.
Edits (06/06/2023): I uploaded some photos of the bracket installed with a camera and I had trouble getting the two screws in at the bottom because I reused two screws from the old bracket (which will be installed elsewhere). Mostly an issue with my screws and the drill, not the print. Will remedy when I have some more time.