Amcrest Wall Mount Bracket for Dome Cameras
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount bracket for Amcrest dome camera, similar to Amcrest AMCPFB203W. Tested with Amcrest IP5M-T1179EB-28MM.
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 289
- Makes
- 1
- Views
- 1,256
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The is a wall mount bracket designed to serve in place of the Amcrest AMCPFB203W, tested with Amcrest IP5M-T1179EB-28MM (the model of camera I have). The cavity inside is large enough to fit the ethernet connector and the camera's permanently attached cable.
This mounts directly to a wall or fence via four screw holes on the front. I would install it in this order:
- Attach camera mounting ring to bracket using two screws;
- Pull ethernet cable through the back of the mounting bracket;
- Connect the ethernet cable to the camera using the provided waterproofing hardware;
- Mount the bracket to a wall or fence using four screws - use caulk if needed on the screw holes to ensure your wall stays waterproof;
- Slide the camera onto the mounting ring.
Edits (06/06/2023): I uploaded some photos of the bracket installed with a camera and I had trouble getting the two screws in at the bottom because I reused two screws from the old bracket (which will be installed elsewhere). Mostly an issue with my screws and the drill, not the print. Will remedy when I have some more time.