Counting matching models…
The is a wall mount bracket designed to serve in place of the Amcrest AMCPFB203W, tested with Amcrest IP5M-T1179EB-28MM (the model of camera I have). The cavity inside is large enough to fit the ethernet connector and the camera's…
Should work with many variations of amcrest cameras and maybe some from other vendors. My camera is an Amcrest IP5M-T1179EW-28MM.…
Amcrest Turret IP Camera Wall Mount Baseplate - to hide and secure cables Specifically made for Amcrest Turret IP Camera Model# IP5M-T1277EW-AI This is a wall mount baseplate that allows you to use longer screws and hide all the cable…
These are mounts for Amcrest's dome camera. One for mounting in a corner and one for mounting on a rain gutter. The hole in the corner mount is for the cable to pass through so the camera can be mounted over the wall where the cable…
This mount enables the Amcrest ASH21-B and ASH21-W cameras to be mounted to a support with a zip tie. The model is parametric and can be customized for use with different-sized zip ties or other items, such as straps, string, etc.
This is a simple adapter for the Amcrest ip4m-1041b PTZ camera to use in the mount included with the camera as a stand. This may fit other Cameras that use a similar mount.
I created a cover for my Amcrest Ad410 doorbell to make it harder to steal. It is made for 15 degree mount, and I think it can be mirrored to face the other side if needed.
Amcrest Turret IP Camera Angled Base Specifically made for an Amcrest Turret IP Camera Model# IP5M-T1277EW-AI Recommended Print Settings: 0.4mm nozzle 0.2mm layer height 3 perimeters minimum
A cup to hold the Amcrest 1080p (ASH21) camera with adjustable pitch. A solution for aiming the camera down (over a ledge) without the need to mount it on a veritcal surface. Legs can be assembled with feet inward or outward – depending…
This mount is a mix of multiple models: The mount point is Articulating “Raspberry Pi Camera Mount”. The Wall Mount portion Im using is the "Wall Mount for camera flex arm". The connector is a ""Snap in pipe clamp" Im not going to pretend…
I printed at 100% infill for the extra strength, but you can print with less.
Adapts an Amcrest PoE IP2M-844E camera to a standard camera tripod base mount. Instructions: Print the part Glue Home Depot part 801934 (1/4". - 20 tpi x 13 mm Zinc-Plated Steel Type-A Insert Nut) into the base. Attach the base of the…
Didn't want to screw the camera into my wall and didn't find an existing mount, so I made one! Fits the listed model but may work for others, see pic for roughly sketched measurements. Will list them below as well, these are for the mount…
This is an Adapter for the Amcrest Camera mount “https://a.co/d/c3fcZJq” The type of Roof / Metal Panel I am modeling from is “PBR” I have a link on my profile. I made one that will go on the left side of the piler and the other on the…
Amcrest mount for IP5M-T1179EB to angle it on top of my kitchen cabinets, tired of wyze cameras so needed a solution where this wasnt mounted to the ceiling until we do a remodel of the room. Previously I did this in a 20 degree tilt, I…
This was designed and printed so that my Amcrest ProHD PTZ camera could look out a 2nd story window and look down enough to see everything. I uploaded two versions one has roughly a 17degree pitch (CameraShim_17d.STL) the other I think…
This model allows you to mount the camera in the corner. It's not the best option (camera doesn't have wide lens) but fits the idea of reusing spare parts you have to build the Ender 3ng :^) OpenSCAD included in case you want to rework it…
A customer commissioned me to figure out a way to mount these cameras to a pole outside. This is what I came up with. Use a hose clamp and 3 screws to mount the Amcrest IP2M-852EB to a pipe. Print in PETG or ABS for outdoors.
Introduction I made this bracket because the spot on my door where the doorbell was is uneven. I have included 2 versions, one with a standoff to the right (mirror if your doorbell is on the left) and one that's flat if you would like to…
For Amcrest monitoring camera. You can print the pieces separately and join and adjust with a screw. The reel can accommodate a cord up to 6 feet in length. No support required.
Fits unknown-brand 4.5" vinyl siding. Two parts are available: One uses two rectangular pins for alignment and requires gluing. The other is a single unit, but requires supports. Update Made pins symmetrical, so angle can be reversed
Here is a Amcrest ad410 Video Doorbell 45 Degree(Left) Mount. I found other mounts but only for the Amcrest ad110. Print with PETG and 50% infill. Enjoy!
I received an IP8M-DLB2998EW-AI dual lens security camera from Amcrest to test and developed a love-hate relationship with it. It is a decent camera but (1) it is designed to be mounted directly to a wall, and (2) there is no place inside…
