Simple but nice 24 key box / organizer for wall mounting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A key box with room for 24 keys. To be mounted on a wall. Size depth: 73 mm (closed) width: 210 mm height: 240 mm
- Ocena
- 5 / 5
- Polubienia
- 85
- Pobrania
- 962
- Wydruki
- 2
- Wyświetlenia
- 3407
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The key box can be printed for instance on a Bambu Lab X1 Carbon in two runs, as long as you don't let it do the flow calibration.
The pin of the hinge is a piece of filament, glued only in the top knuckle with a little drop of superglue, but any appropriate glue can be used.
It's a simple design, but I printed at least 7 or 8 prototypes with different hinges and latches and doors before I came to this one.
Version 2
The hinge is bigger, therefor stronger, it prints better and it is easier to thread the pin through the hinge.
Furthermore, there is now a good working latch.