Blue Compass Boom Arm - Joint Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement knob and pin for Blue Compass Microphone Boom Arm.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 108
- Wydruki
- 1
- Wyświetlenia
- 1108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Public Domain
Did your expensive Blue Compass Boom break?
Mine too…
These joints use very easy-to-strip bolts, especially if like me you wanted the arm fully extended, bent in the middle and the end. Even with the tension screw as loose as possible, I wasn't able to tighten the middle joint enough leading to me stripping the screw out of the knob.
Please post your makes and report back if changes should be made, I'd love to embed the bolt but need a way to get the print off the build plate with supports to drop the bolt down and then get printed over.
Hardware Store Parts
Re-use
Upon taking the joint apart only my knob had stripped, so we will only be printing the knob and putting a 6mm-1.0 40mm Bolt through to reuse the whole other side of the joint.
Slicing (Print with included Bambu files or)
Knob
- Flip upside down for a cleaner finish
- Print with supports
- or You can use orca and Auto position with supports works great.