Prusa Mini Baseplate mount / Snap-In 30x30 rail stands
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Equalizes the Prusa Mini base (5mm distance between the 30x30 profiles and the electronics box) to mount the printer…
- Ocena
- 4,5 / 5
- Polubienia
- 21
- Pobrania
- 145
- Wydruki
- 2
- Wyświetlenia
- 1358
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Equalizes the Prusa Mini base (5mm distance between the 30x30 profiles and the electronics box) to mount the printer on solid rubber mat/dampers or any flat surface. Replaces the sticky foam feets.
Can be scaled in x-direction to match your size requirements. Photos showing 60mm and 15mm elements.
Element-Size: 30x60x5mm (outside rails)
Recommended rubber element size: > 30x60x10mm
You need 4 printed spacer/stands and 5 rubber elements - one of the rubber elements has to be put directly under the z-axis/electronics box (don't cover the ventilation holes)
Print instructions
For optimal results, use your custom printer settings with the stl file!
Used print settings (gcode+photos)
- Layer height:
0.20mm - Orientation: horizontal
- Material: BASF Ultrafuse PRO1 PLA
Suggested print settings
- Layer height:
0.10-0.20mm - Orientation: vertical
- Material: PLA/ABS/ASA/PET/PETG
NOTES
The dimensional accuracy is critical for the snap-fits. Depending on your material, scaling might be necessary!
Printing the profile in vertical direction increases the strength of the snap fits - build plate adhension will become critical!