Prusa Mini Baseplate mount / Snap-In 30x30 rail stands
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Equalizes the Prusa Mini base (5mm distance between the 30x30 profiles and the electronics box) to mount the printer…
- Rating
- 4.5 / 5
- Likes
- 21
- Downloads
- 145
- Makes
- 2
- Views
- 1,358
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Equalizes the Prusa Mini base (5mm distance between the 30x30 profiles and the electronics box) to mount the printer on solid rubber mat/dampers or any flat surface. Replaces the sticky foam feets.
Can be scaled in x-direction to match your size requirements. Photos showing 60mm and 15mm elements.
Element-Size: 30x60x5mm (outside rails)
Recommended rubber element size: > 30x60x10mm
You need 4 printed spacer/stands and 5 rubber elements - one of the rubber elements has to be put directly under the z-axis/electronics box (don't cover the ventilation holes)
Print instructions
For optimal results, use your custom printer settings with the stl file!
Used print settings (gcode+photos)
- Layer height:
0.20mm - Orientation: horizontal
- Material: BASF Ultrafuse PRO1 PLA
Suggested print settings
- Layer height:
0.10-0.20mm - Orientation: vertical
- Material: PLA/ABS/ASA/PET/PETG
NOTES
The dimensional accuracy is critical for the snap-fits. Depending on your material, scaling might be necessary!
Printing the profile in vertical direction increases the strength of the snap fits - build plate adhension will become critical!