Dremel Crosscut Table saw & Sled
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed Dremel table saw table with an extra guide slot and a crosscut sled for more controlled crosscuts
- Ocena
- 0 / 5
- Polubienia
- 54
- Pobrania
- 197
- Wydruki
- 1
- Wyświetlenia
- 2833
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This model remixes the main table from https://www.printables.com/model/456310-transformable-dremel-table-saw-disc-sander-shaper, so you'll need to download and print that model as well, potentially skipping the main table from there depending on your needs.
The table here has a fixed blade opening without the removable blade insert, but adds an extra slot that allows you to use a crosscut sled for more precise cross cuts. There are three versions of the sled right now:
- a wide, bottomless sled with support on both ends of the table and sliders
- a wide “mini-sled” with just one backing support and shorter sliders
- a mini-sled with narrower backing supports in case you have your dremel at a really high level that the sled would not pass
There is also a small, fixable stop model you can use to set a length for your cuts.
I printed all these parts in PLA at 30% infill and support.