Dremel Crosscut Table saw & Sled
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed Dremel table saw table with an extra guide slot and a crosscut sled for more controlled crosscuts
- Rating
- 0 / 5
- Likes
- 54
- Downloads
- 197
- Makes
- 1
- Views
- 2,833
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This model remixes the main table from https://www.printables.com/model/456310-transformable-dremel-table-saw-disc-sander-shaper, so you'll need to download and print that model as well, potentially skipping the main table from there depending on your needs.
The table here has a fixed blade opening without the removable blade insert, but adds an extra slot that allows you to use a crosscut sled for more precise cross cuts. There are three versions of the sled right now:
- a wide, bottomless sled with support on both ends of the table and sliders
- a wide “mini-sled” with just one backing support and shorter sliders
- a mini-sled with narrower backing supports in case you have your dremel at a really high level that the sled would not pass
There is also a small, fixable stop model you can use to set a length for your cuts.
I printed all these parts in PLA at 30% infill and support.