Aston Stealth Microphone - Improved Mid-Body Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount that clamps around the Aston Stealth mic instead of on its end.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 570
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
The Aston Stealth is a great mic, with a less-great mounting strategy. The mic is heavy and the included slim connector on the end is prone to breaking.
This mount is designed to fit around the middle of the mic body, providing more balanced weight distribution. There are two versions - one with a joint and another without. Both use M4 countersunk screws and nuts to tighten their joints.
Both designs replace the existing bottom connector and have the same hole size and dimensions, fitting on your existing setup.
I printed in PLA with 3 outer walls and 25% grid infill.