entrance gate and fence gate suitable for Schleich horses
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Für Schleich Pferde ein Gattertor und ein großes Eingangstor. Alle Teile können mit den Gatterteilen verbundne werden.
- Ocena
- 5 / 5
- Polubienia
- 60
- Pobrania
- 306
- Wydruki
- 4
- Wyświetlenia
- 1594
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Für Schleich Pferde ein Gattertor und ein großes Eingangstor. Alle Teile können mit den Gatterteilen verbundne werden.
Hier die Gatterteile, welche ich konstruiert habe:
https://www.thingiverse.com/thing:4696885
https://www.prusaprinters.org/de/prints/50036-pferde-gatter-zaun-hindernis-gate-fence-obstacle-s
Für den Verschluss des Gattertores habe ich ein Stück Filament durchgesteckt und an bei den Enden erwärmt und zusammen gedrückt. So entsteht ein "Filament-Niet".
A gate and a large entrance gate for Schleich horses. All parts can be connected to the fence parts.
Here are the fence parts I designed:
https://www.thingiverse.com/thing:4696885
https://www.prusaprinters.org/de/prints/50036-pferde-gatter-zaun-hindernis-gate-fence-obstacle-s
To close the gate, I put a piece of filament through it, heated it at the ends and pressed it together. This creates a "filament rivet".
Print instructions
No support needed
layer height 0.19 mm
20%
any PLA wood
Notes:
some parts has inbuilt support (see images). To be able to remove the included support as easily as possible, use a layer height of 0.19 mm or adaptive layer height.
I set the bridging angle for the gate itself to 180 degrees. In the support parts it should be created automatically at 90 degrees. (see 3mf file)