1 / 7
entrance gate and fence gate suitable for Schleich horses — image 1
1 / 7

entrance gate and fence gate suitable for Schleich horses

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Für Schleich Pferde ein Gattertor und ein großes Eingangstor. Alle Teile können mit den Gatterteilen verbundne werden.

Rating
5 / 5
Likes
60
Downloads
306
Makes
4
Views
1,594
Reviews
4

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Für Schleich Pferde ein Gattertor und ein großes Eingangstor. Alle Teile können mit den Gatterteilen verbundne werden.
Hier die Gatterteile, welche ich konstruiert habe:
https://www.thingiverse.com/thing:4696885
https://www.prusaprinters.org/de/prints/50036-pferde-gatter-zaun-hindernis-gate-fence-obstacle-s

Für den Verschluss des Gattertores habe ich ein Stück Filament durchgesteckt und an bei den Enden erwärmt und zusammen gedrückt. So entsteht ein "Filament-Niet".

A gate and a large entrance gate for Schleich horses. All parts can be connected to the fence parts.
Here are the fence parts I designed:
https://www.thingiverse.com/thing:4696885
https://www.prusaprinters.org/de/prints/50036-pferde-gatter-zaun-hindernis-gate-fence-obstacle-s

To close the gate, I put a piece of filament through it, heated it at the ends and pressed it together. This creates a "filament rivet".

Print instructions

No support needed

layer height 0.19 mm

20%
any PLA wood

Notes:
some parts has inbuilt support (see images). To be able to remove the included support as easily as possible, use a layer height of 0.19 mm or adaptive layer height.
I set the bridging angle for the gate itself to 180 degrees. In the support parts it should be created automatically at 90 degrees. (see 3mf file)

Tags