Hornady LnL Primer Tube Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to have the plastic primer tube come out to the side instead of straight down.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 536
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I started to develop an issue on my LnL where my primer tube would get kinked at the end of the brass primer tube. This caused a several primers to get backed up and caused issues for my press.
I made the adapter so that the tube could come out to the side and not get kinked anymore and allow the spent primers to fall the collection bottle with ease.
I have included two STLs for different printer tolerances. I have also included the f3d file so if you need to make further adjustments to meet your printers tolerances.