1 / 3
Hornady LnL Primer Tube Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter to have the plastic primer tube come out to the side instead of straight down.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 91
- Makes
- 0
- Views
- 536
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
I started to develop an issue on my LnL where my primer tube would get kinked at the end of the brass primer tube. This caused a several primers to get backed up and caused issues for my press.
I made the adapter so that the tube could come out to the side and not get kinked anymore and allow the spent primers to fall the collection bottle with ease.
I have included two STLs for different printer tolerances. I have also included the f3d file so if you need to make further adjustments to meet your printers tolerances.